1. TikTok Shop
  2. Phones & Electronics
  3. Audio & Video
  4. Voice Recorders
  5. GY- OPENLOG CLEANFLIGHT NAZE 32 F3 BLACKBOX FLASH RECORDER
GY- OPENLOG CLEANFLIGHT NAZE 32  F3 BLACKBOX FLASH RECORDER
GY- OPENLOG CLEANFLIGHT NAZE 32  F3 BLACKBOX FLASH RECORDER
GY- OPENLOG CLEANFLIGHT NAZE 32  F3 BLACKBOX FLASH RECORDER
GY- OPENLOG CLEANFLIGHT NAZE 32  F3 BLACKBOX FLASH RECORDER
GY- OPENLOG CLEANFLIGHT NAZE 32  F3 BLACKBOX FLASH RECORDER
Review Images
About this product
Product description
VCC input: 3.3V-12V (Recommended 3.3V-5V) Log to low-cost microSD FAT16/32 cards up to 64GB. Simple command interface Configurable baud rates Defaut bootloader is pro mini atmage328P 5V 16Mhz Four SPI pogo pins Two LEDs indicate writing status 2mA idle, 6mA at maximum recording rate OpenLog configuration Power up the OpenLog with a microSD card inside, wait 10 seconds or so, then power it down and plug the microSD card into your computer. You should find a "CONFIG.TXT" file on the card, open it up in a text editor. You should see the baud rate that the OpenLog has been configured for (usually 115200 or 9600 from the factory). Set the baud rate to match the rate you entered for the Blackbox in the Configurator's Port tab (typically 115200 or 250000). Save the file and put the card back into your OpenLog, it will use those settings from now on. If your OpenLog didn't write a CONFIG.TXT file, create a CONFIG.TXT file with these contents and store it in the root of the MicroSD card: Detail instructions for use, please refer to the following URL: https://githubcom/cleanflight/cleanflight/blob...
View more
Rp72.500
From Rp19.000 shipping on this order

GY- OPENLOG CLEANFLIGHT NAZE 32 F3 BLACKBOX FLASH RECORDER

32 sold
Spesifikasi:Please select
Default
TOKOASIA.JOGJA
TOKOASIA.JOGJA
4.0
1431 Sold
10+ Followers
67%24h response rate
89%Ships within 2 days
You may also like