Thermostat Temperature Controller Pengatur Suhu Digital W3002 220V

Thermostat Temperature Controller Pengatur Suhu Digital W3002 220V Sudah 220V bisa langsung dari PLN. Output bisa langsung ke lampu atau pemanas, dll Memiliki fungsi delay ON (biasa buat kompressor) How to set: When connect to power supply, press the UP and DOWN buttons at the same time more than 3 seconds, display show 888 If displayLLL. means the sensor is fault, need to check the sensor. If displatHHH, means the temperature is above the range P0: Set Start temperature Press the setting button, enter the internal menu, the default display for theP0, and then click the settings button, use up and down buttons to set thestarting temperature. P1: set stop temperature Press the setting button, enter the internal menu, the default display for theP0, use up and down button to change to P1, and then press the settings button,use up and down buttons to set the starting temperature P2: Set temperature calibration Press the setting button, enter the internal menu, use up and down tochangebuttons to P2, press the set button again, use the up and down button to do thecalibration. If the detetion temperature is above the actual tempeature of 0.5C , need toset the calibration temperature is 0.5C If the detetion temperature is below the actual tempeature of 1C , need toset the calibration temperature 1C P3: Set delay start Press the setting button, enter the internal menu, use up and down buttons tochange to P3, press the set button again, use the up or down button to setdelay time( Minutes ) **Dua fungsi: - Untuk pemanas: aturlah suhu Start lebih rendah dari suhu Stop - Untuk pendingin: aturlah suhu Start lebih tinggi dari suhu Stop **Spesifikasi: Model: W3002 Tegangan kerja: AC 220v Max alat yg dapat dikontrol: AC 220v 1500w Suhu kerja: -50 sd 110 C Ketelitian: 0.1 C Type probe: NTC10K Ukuran: 60x45x31mm Warna casing: Putih