Modul Charger Aki Digital LCD Display Otomatis Cut Off 10A

Tersedia 2 Varian - Tanpa casing (module saja) - Dengan Casing (casing akrilik sudah dirakit) Feature: - Support Lead-acid battery and Acting Battery, voltage range:6V~60V; - Dapat menampilkan tegangan, persen baterai, waktu pengisian pada saat yang sama - Dapat mengontrol pengisian dg otomatis, waktu pengisian, juga dapat mengatur dan mengunggah parameter yang sesuai melalui port serial ------ Specifications: Product Model:XY-L10A Control voltage:DC6-60V Control current:Control accuracy:0.1V Output Type: Direct Output Voltage error:±0.1V Scope of application: various lithium batteries Function description Automatic Charge control function： By setting the volt-HI:‘UP’ volt-LI:‘dn’ When the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery; when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed once Parameter Setting -Press and hold the SET key to enter the setting interface; -Switch the parameters you want to set by short press SET; -After the selection of parameters, can be set by the UP/DOWN key to support the short press, long press (fast increase or decrease); To set other parameters, repeat step b, c); -After all parameters are set, long press set key to exit and save; The Key Function Description: In the Run interface (main interface) Short press SET button to display the current set of parameters Short press UP button, toggle display charge percentage and charging time; Short Press DOWN button, select Turn on/off relay enabling, if the relay can be closed, will show ' off ' as a reminder; Long press UP button, switch low power state on：No operation in 10 minutes turn off backlight OFF: Backlight is always bright Long press SET button,enter the parameter settings. Calculation of voltage percentage： voltage percentage = battery voltage/(volt-HI – volt-LI) Package Includes: 1x Battery Charger Control Modul