Timer Delay Relay Switch Digital Data Save Delay Controller DDC-431

Fitur Singkat: - Digital Timer 4 Button 3 Display - Rentang waktu 0,1 dt s/d 999 menit (16.65 jam).. - Selama delay, display menampilkan waktu Count Down yang telah di set sebelumnya. - Menggunakan Volatile memory : setting waktu timer yg kita buat tidak akan berubah walaupun supply listrik/adaptor diputus utk waktu yg tdk terhingga. Operating Mode: P1: After the signal is triggered, the relay turns on the OP time, then turns off; in the OP time, the following operation P1.1: The signal is triggered again. P1.2: Signal triggers re-timed again P1.3: The signal triggers reset again, the relay is disconnected, and the timing is stopped. P-2: Give the trigger signal, after the relay turns off the CL time, the relay turns on the OP time. After the timing is completed, the relay is turned off. P3.1: Give the trigger signal, after the relay turns on the OP time, the relay turns off the CL time, then loops the above action, the signal is given again in the cycle, the relay is disconnected, the timing is stopped; the number of cycles (LOP) can be set P3.2: No trigger signal is required after power-on, the relay turns on OP time, the relay turns off CL time, and the above actions are cycled; the number of cycles (LOP) can be set P-4: Signal hold function If there is a trigger signal, the timing is cleared, the relay remains on; when the signal disappears, the relay is turned off after timing the OP; during the timing, there is a signal, and the timing is cleared. Specifications: Timing Range(Settable): 0.1~99.9 seconds; 1~999 seconds; 1~999 minutes Working Voltage: DC 6-30V Signal Voltage: DC 4~20V Output Capacity: DC 30V 10A or AC 220V 10A Static Current: 20mA Working Current: 50mA Working Temperature: -40~85C Size: 64 * 35 * 19.5mm (L * W * H)