Fingerprint Sensor Storage Capacity 200

CODE : B1011 PIN MAP : 1--> Finger detection power supply (+3.6-5V) 2--> Finger detection signal (Standard output is active high) 3--> Power + (Positive 5V power supply) 4--> Send module (TX) 5--> Module receives (RX) 6--> power supply - (GND) No 1 ditandai dengan pad berbentuk kotak dan terdapat nomer, Gunakan 3-6 cukup, dapat menggunakan library dan software yang ada di web adafruit Signature File: 256 bytes Template files: 512 bytes Supply voltage: the DC 5V Supply Current: Operating current: < 120mA peak current: < 130mA Fingerprint image input time: 0 .5 seconds Window Size: 18.5mm X-14.6mm Matching: match mode (1: 1) Search mode (1: N) Storage capacity: 200 i Security level: five (from low to high: 1,2,3,4,5) Default 3 False Accept Rate (in FAR): 0 .001% (security level 3) False Rejection Rate (FRR): 1 .0% (security level 3) Search time: 1 .0 seconds (1: 500 is average) Resolution: 500dpi PC Interface: the UART (the TTL logic level) Baud rate (the UART): (9600 N) bps where ~. 6 1 = N (default value N = 6, that is 57600bps) working environment: Temperature: -25 - + 55 Relative Humidity: 40% RH-85% RH (non-condensing) Storage environment: Temperature: -40 Derajat C - + 85 Derajat C Relative humidity: 90 % H (no condensation) Optical module ( C3 ) Dimensions (L the W H) : Long 47.65mmX wide 20.50mmX high 21.20mm Semiconductor module Dimensions (L the W H) : Capacitive module Dimensions: main board: long 35mmX wide 28mmX height 7mm Sensor: Long 33.4mmX width of 20.4mm Scratch-off module Dimensions: main board: long 35mmX wide 28mmX height 7mm Sensing plate: long 24mmX wide 20mmX height 5mm