Remot control motor actuator aktuator 100m 12/24V dc 10A remote

Model: 593727 Product Description Material: Plastic case Color: white Operating voltage: 12V / 24V Contact capacity: ≤ 10A Static operating current: ≤ 6mA Working temperature: -20 ~ +60 degrees Receiving sensitivity: -114dBm Operating frequency: 315MHz Size Remote control: 100x40x20mm Application: Used in the field of motor motor reversing, DC lamp, access control, industrial control and security industry.(Instructions) 1.Signal interlock: 12 connection, 34 not connected Press the A key, the A relay is disconnected, and the relay corresponding to the B key is sucked and held, and the C key and the D key are operated as follows. 2.The signal is not locked: 12 and 34 are not connected Press the remote control A key, and the A key corresponding to the relay pull, release the relay after the break, press the B key, and B key corresponding to the relay pull, release and disconnect .C key and D key this Cycle work. 3. The signal from the lock: 12 connected, 34 connected Press the remote control A key, and the A key corresponding to the relay to pull and hold, and then press the A key, A relay off. Press the remote control B key, B key corresponding to the relay suction and hold, then press the B key, B relay disconnect, C key and D key to work as this cycle. 4. The signal from the lock and non-coexistence: 12 not connected, 34 connected And the remote control corresponding to the four relays, two self-locking, two non-lock Study method: 1.Press the receiver on the learning button light and then let go light to go into the learning state, click on the remote control of any key to learn, the receiver receives the signal after the light flashes continuously after the study is successful. 2.Clear code: long press the code button for about 8 seconds to the code lights off the clear code is successful, clear the original learning by the remote control will not be able to use, you must re-code before the remote control. Package include: 1 x Controller 1 x Remote control