Injector Cleaner 110 [M-One]

Injector Cleaner M-ONE memerlukan alat injector, salin link dibawah untuk pembelian alat injector Pembersih injektor Untuk kendaraan bermotor yang sudah menggunakan sistem injeksi Dapat membersihkan dan menjaga part injector kendaran Anda Volume : 110 mL The M-1 Carburator Cleaner uses an effective solvent-based formula that easily removes the carburetor ad cleaner parts of heavy varnish, pre-installed dirt, old grease and oil deposits. This clears the Carburator from everyday wear and tear. With regular applications every 5,000 km to 6,000 km. it will improve motor performance, reduce emissions and improve fuel efficiency, and make the engine run smoothly How to use the M-1 Carburator Cleaner Carburetor: - By turning off the engine, remove the air filter - Clean and vacuum the machine area - Spray the whole can of carburetor in - Let it sink in for a moment - Re-spray to flush out dirt and oil deposits PCV Valve: - Engine off - Take off the PCV - Spray PCV from the crankcase valve which was opened several times - Turn off the engine and re-spray to ensure maximum cleanliness Auto choke: 1. Turn off the engine 2. Spray both ends of the chokes valve while opening and closing one end with the PCV Valve hand 3. Spray generously on the vacuum tube to remove residual deposits Carburator Throat & Throttle Plate: Start & run the engine Spray the throat area, throttle plate, and parts