ESP32-C3 ESP32 C3 Super Mini WiFi Bluetooth
Yutub tutorial : youtu.be/Cv1gdAIEzaM
Board : ESP32C3 Dev Module
ESP32-C3 JIKA MASIH KOSONG AKAN TERDEKTEKSI “CONNECT DAN DISCONNECT” BERULANG LANJUTKAN SAJA UPLOAD PROGRAM, JIKA MASIH GAGAL DIUPLOAD, MAKA GUNAKAN “MODE BOOT”, SEBAGAI BERIKUT:
- TEKAN DAN TAHAN TOMBOL BOOT
- TEKAN TOMBOL RESET 1- 2 DETIK, KEMUDIAN LEPASKAN
- LEPASKAN TOMBOL BOOT
- PILIH COM DAN LANJUT KAN UPLOAD, SETELAH SELESAI, RESET BOARD
Specification:
Input Voltage: 3.3-6V on 5V pin
CPU: ESP32-C3, 32-bit RISC-V single core processor, running at frequencies up to 160 MHz
WiFi: 802.11b/g/n protocol, 2.4GhHz, supports Station mode, SoftAP mode, SoftAP+Station mode, hybrid mode
Bluetooth 5.0
Ultra low power consumption: Deep sleep power consumption is about 43 μΑ
Memory: 400KB SRAM, 384KB ROM with built-in 4MB flash
Chip model: ESP32C3FN4
Ultra small size: as small as the thumb (22.52x18mm) in a classic shape, suitable for wearable devices and small projects
Reliable security features: Encryption hardware accelerator supporting AES-128/256, hashing, RSA, HMAC, digital signature, and secure boot
Pin Usability: 1xI2C, 1xSPI, 2xUART, 11xGPIO (PWM), 4xADC
On-board blue LED light: GPIO8 pin
Arduino IDE Board: ESP32C3 Dev Module