JMD Handy - Baby Auto Key Tool for 4D/46/48/G/King Chip Programmer

Handy Baby Key Copy Programmer Data read and write: 1) Read and write 46 chip 1. Please select correct chip mode and password in order to read & write chip correctly. The device default chip mode and password is 46 chip blank. 2. Select chip mode: move mouse cursor to "Mode", I.E "Plaintext mode", press "OK", the fonts turn black from white to indicate the selection mode, press "Up" and "Down" to select the Plaintext mode or password mode. 3. Enter password: move cursor to the password box under the mode, press "OK" to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password. 4. After finish press "OK"to exit, then move cursor to "Read all" to read out data. 5. Read all: read out all data for 46 chip and display the status of locked or unlocked. 6. Write: write the corresponding data; make sure 46 unlocked before writing data. 7. Enter data: the way to enter data is as the same as to enter password. 2) Read and write 48 chip 1. Read: read out 48 chip UID, user 1 and user 2 data, and display 48 chip type as well as the status of locked or unlocked. 2. Write: write the corresponding area data; make sure 48 unlocked before writing data. 3. Enter data: move cursor to the data input box, press "OK" to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password. After finish press "OK" button to exit, move cursor to "Write" to write data. 4. Unlock: if the chip is locked, then it needs to be unlocked before writing into data. 5. Steps: when the chip is read out locked, please enter PIN code which is the code of 48 chip, move cursor to "Unlock", press "OK" to unlock. 3) Read and write 4D chip 1. Read: read out 4D chip password, recognition and ID data, also display their status of unlocked or locked. 2. Enter data: move cursor to the data input box, press "OK" button to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to tran