ET430 Digital Bridge LCR Meter Handheld High Precision Capacitance

Produk dan manual bahasa Inggris

==

Features:

Measurement frequency up to 100kHz, 1Hz step continuously adjustable

Support DC resistance, electrolytic capacitance measurement

Internal bias voltage output (10mV-500mV)

Component measurement automatic identification

Support screening and deviation measurement

2.8 inch TFT display, 4-1/2 display

Basic measurement accuracy is 0.2%, measurement speed can be adjusted

Large capacity lithium battery power supply, USB communication interface, support SCPI protocol

Manual and automatic range

With open circuit short circuit correction

Parameters:

Model: ET430

Test frequency: 100Hz, 120Hz, 1KHz, 10KHz,40kHz,100KHz

Basic accuracy: 0.30%

Display: 2.8 inch TFT

Display digits: main parameter 5 bits, sub-parameter 5bits

Measurement parameters: main parameter L/C/R/Z, sub-parameter: X/D/Q/ESR/θ

Electrolytic capacitor mode: Yes

DCR mode: No

Measuring range: L: 0.000μH~2000H; C: 0.000pF~20.000mF; R: 0.0001Ω~200.00MΩ

Measurement display speed: 1 time / sec (slow speed), 2 times / sec (medium speed), 4 times / sec (fast)

Internal offset: No

Test level: 0.6Vrms

Calibration function: open circuit calibration, short circuit calibration

Screening function: the screening limit range can be set from 1% to 50%, where the fixed point is 1%, 5%, 10%, 20%

Deviation measurement: used to compare the percentage deviation between the component and the set nominal value and display

Includes:

1 x ET430 Handheld LCR Meter

1 x Mini-USB Cable

1 x Power Adapter