ESP32-S3 N16R8 DevKitC-1 Type-C ESP32-S3-WROOM 16mb Flash 8mb PSRAM - ESP32S3 DevKit Dev Board Module

Selamat datang di toko kami board pada arduino IDE ESP32S3 DEV MODULE ESP32-S3 N16R8 DevKitC-1 type-C ESP32-S3-WROOM 16MB Flash 8MB PSRAM - ESP32S3 Dev Board Module The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 16MB Flash and 8MB PSRAM (ESP32-S3-WROOM-1-N16R8). It is a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. The ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides long-range support. It has 45 programmable GPIOs and supports a rich set of peripherals. ESP32-S3 supports larger, high-speed octal SPI flash, and PSRAM with configurable data and instruction cache. There is a RGB WS2812 LED connected to IO38. It has a Red, Green and Blue LED that are individually addressable. This module has 2 USB Type C connectors. The one is used to power the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge. It is connected to a UART of the ESP32 chip via a CH340 chip. The second USB connector is connected to the ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. It can also be used to power to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging. Quick Spec XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant Bluetooth, LE: Bluetooth 5, Bluetooth mesh 16 MB (64Mbit) SPI Flash 384 KB ROM 512 KB SRAM 8 MB SPI PSRAM 16 KB SRAM in RTC Communication Interfaces 2 x I2C 2 x I2S 4 x SPI 3 x UART 1 x USB OTG Security 4096 bit OTP AES, SHA, RSA, ECC and RNG Secure boott, Flash encryption, Digital signature, HMAC module Dual Type-C USB connectors Reset and User/Firmware buttons RGB WS2812 User LED Power LED Virtual USB port provided by CP2102 for debugging and firmware upgrade Supply Voltage: 5V via USB Circuit Voltage: 3.0 to 3.6V Circuit Operation Dimensions: 50.1 x 13mm Happy shopping