HSAIRPO CP100 - 300Mbps 2.4GHz Wireless N Mini Outdoor

Hardware Chipset : MTK7628 Flash : Default 4MB SPI Nor Flash SDRAM : Default 32MB SDRAM Interface : 2 *100BaseTX (Auto MDI/MDIX) LAN Port (Passive PoE Supported) Power Supply : 24V DC /0.5A (PoE) Button : 1 *Reset Button Antenna : 2 *12dBi internal antennas LED Indicators : 1 *Power, 1 *LAN, 1 *LAN2,,2 *Signal Strength Environment : - Operating Temperature: 0?~40? (32?~104?) - Storage Temperature: -40~70? (-104?~158?) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~95% non-condensing Wireless Standards : IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3u, IEEE 802.3 RF Frequency : 2.4~2.4835GHz Data Rate : - 802.11n: up to 300Mbps - 802.11g: up to 54Mbps (dynamic) - 802.11b: up to 11Mbps (dynamic) Wireless Security : - 64/128-bit WEP, WPA/WPA2, WPA-Mixed Channels : 1-11 (North America), 1-13 (General Europe), 1-14 (Japan) Modulation Type : DBPSK, DQPSK, CCK and OFDM (BPSK,QPSK,16-QAM/ 64-QAM) Reception Sensitivity : - 11M: -81 dBm@10% PER - 54M: -68 dBm@10% PER HT20 MCS7: -65 dBm@10% PER HT40 MCS7: -62 dBm@10% PER Software System Status : A summary of wireless status Operation Mode : - AP Mode - Repeater Mode - Client - Bridge - AP+ Client - Bridge+Client Network : - LAN Setting - Static DHCP Setup Wireless : - Basic Setting - Advanced Setting - Basic Setting - Advanced Setting - Country Region - Band - Channel - DFS - TX/RX Chain - Distance - RF output power Management : - Basic Setting - Upgrade Firmware - Save/ Reload Setting - Time Zone Setting - Password Setting - System Log - logout