Raspberry Pi Pico W | Microcontroller RP2040 with WiFi 2.4GHz 802.11n + BLE 5.2 | RPi Pico 1W | Pico 1 W

RASPBERRY PI Pico W is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip with a 2.4GHz wireless interface. A new member of the Pico family, the Pico W maintains the power and flexibility of the previous model but adds wireless connectivity allowing for greater integration into IoT applications. WiFi support is enabled via the integrated Infineon CYW43439 chip and contained in a metal shield can to reduce compliance costs. The Pico features flexible digital interfaces and can be easily programmed over USB using C/C++ or MicroPython, thanks to a comprehensive SDK with software examples and full documentation. Specification : - 21 mm × 51 mm form factor - RP2040 microcontroller chip designed by Raspberry Pi in the UK - Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz - 264kB on-chip SRAM - 2MB on-board QSPI flash - 2.4GHz 802.11n wireless LAN - Bluetooth 5.2 - 26 multifunction GPIO pins, including 3 analogue inputs - 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels - 1 × USB 1.1 controller and PHY, with host and device support - 8 × Programmable I/O (PIO) state machines for custom peripheral support - Supported input voltage 1.8–5.5V DC - Operating temperature -20°C to +85°C (Raspberry Pi Pico and Pico H); -20°C to +70°C (Raspberry Pi Pico W and Pico WH) - Castellated module allows soldering direct to carrier boards (Raspberry Pi Pico and Pico W only) - Drag-and-drop programming using mass storage over USB - Low-power sleep and dormant modes - Accurate on-chip clock - Temperature sensor - Accelerated integer and floating-point libraries on-chip