XH-W1401 RELAY SWITCH DIGITAL CONTROLLER PENGATUR SUHU OTOMATIS

XH-W1401 RELAY SWITCH DIGITAL CONTROLLER PENGATUR SUHU OTOMATIS Dapat digunakan untuk pemanas atau pendingin. XH-W1401 Intelligent Digital Temperature Controller Detect 10A 12V 220V With NTC Sensor Three Window Synchronous Red LED Display Description: Temperature range: -9-99 centigrade Accuracy: 1 centigrade Control accuracy: 1 centigrade Setting Range: -9-99 centigrade Refresh rate: 0.5S Input Power: DC12V Output: relay output, capacity 220V 10A / 12V 10A Length of probe: 20mm Length of wire: 100mm Environmental requirements: -10-60 centigrade Humidity: 20% -85% Size: 78x51mm temperature sensor: NTC(3950-10k 1%) Applicable to Various spatial temperature control,Water temperature control,Incubators, etc Lights, digital tube, key state description Red start Indicator:START (red) indicator light, which means that the relay is closed, the device begins to work Green stop light:Stop (green) light is on, which means that the relay is disconnected, the device stops working Digital Tube Middle red LED display for the current detection temperature, the left green digital display tube as set start temperature, the right side of the green digital display for the set stop temperature. Operating Instructions 1 High temperature start: Set the starting temperature value gt; stop temperature value, When the detected temperature start temperature, the relay is closed, refrigeration equipment work; When the detected temperature stop temperature, the relay off, refrigeration equipment stops working For example Set the starting temperature is 30 centigrade , stop temperature is 25 centigrade , When the detected temperature 30 centigrade , the relay is closed, the start Indicator (red) lights; When the detected temperature value 25 centigrade the relay off, stop Indicator (green) lig