Modul Sensor Gerak Infrared PIR HC-SR501 Arduino

Modul sensor yang dipake untuk mendeteksi orang. Sering dipakai di kamar mandi, atau security system. Cara kerjanya, sensor ini mendeteksi aura panas yang dipancarkan oleh tubuh manusia menjadi sinyal listrik lantas menghasilkan sinyal digital untuk dimanfaatkan oleh mikrokontroler seperti AVR, Arduino, PIC, Raspberry Pi, dsb. Modul ini menghasilkan logika digital sehingga sangat mudah untuk dipasangkan dengan mikrokontroler atau bahkan bisa langsung disandingkan dengan module relay. Spesifikasi:: - Product Type: HC--SR501 Body Sensor Module - Operating voltage range: DC 4.5-20V - Quiescent Current: Level output: High 3.3 V /Low 0V - Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger) - Delay time: 5-200S(adjustable) the range is (second to tens of second) - Block time: 2.5S(default)Can be made a range(to tens of seconds - Board Dimensions: 32mm*24mm - Angle Sensor: Operation Temp: -15-+70 degrees - Lens size sensor: Diameter:23mm(Default) - Berat net : 7 gr Fitur: 1, the automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low. 2,the photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction. 3, the temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to slightly shorter detection range, temperature compensation can be used as a performance compensation. 4, two trigger mode: (can be selected by jumpers) B. Casing mika transparan Modul Sensor HC-SR501 Berat net 7 gr Produk untuk yang mengerti barang / profesional. Barang non retur . Klik Beli artinya setuju .