Informasi Produk WEP 8858-IV Blower Uap Portable Hot Air Gun 700W LED Digital for BGA Welding Repair Tools
Application
1. This unit is suitable for desoldering & soldering operations on a broadrange ofcomponents., SOIC, CHIP, QFP, PLCC BGA, SMD, and more.The unit is especially suited for desoldering operations on in-line sockets.
2. You can use this unit for heat shrinking, drying, paint removal, glueremoval, defrosting, pre-heating, glue soldering, and more.
How to change temperature display
1. When the power switch is not turned ON, pressand hold the temperature increase button andthen turn ON the power switch. The display willshowCorF
2. Press the temperature increase button to switchbetween the Celsius display mode and theFahrenheit display mode.
3. Once done setting, stop operating for approximately 3 seconds, the system will automaticallysave the data and exit the settingSetting complete.
How to calibrate the temperature?
1. Turn On the hot air gun. When the hot air gun's temperature has stabilized, measurethe hot air gun's actual temperature.
2. Press and hold the temperature increase and decrease button at the same time forapproximately 2 seconds and then the display will show CAL.
3. Press the temperature increase or decreasebutton to enter the measured temperature.Once done entering, press both buttons toconfirm the entry and the system will automati-cally calibrate the temperature and exit thesetting. - Setting complete.
Kelengkapan Produk
1xWEP 8858-IV Blower Uap Portable Hot Air Gun 700W LED Digital for BGA Welding Repair Tools
3xNozzle
Specification
Rated voltage range220V~240V/AC.50Hz
Rated power700W
Main unit dimensionsL275xW62xH46mm +5mm
Display LED
Operating ambient temp. 0C~40C/32F~104F
Operating ambient temp. 100C~500C/212F~932F
Air Delivery:Brushless motor with smooth airflow
Air volume:100L/min
Temperature preset function Yes
Air volume preset function Yes
F/C Temp. Display:Yes
Digital Temp. Calibration:Yes