Barang sesuai deskripsi.. bagus tokonya respon cepat pengiriman cepat juga cocok buat langganan. Terimakasih next order
February 12, 2025
m** s** 7**1
Item: Default
Kualitas pengerjaan:rapi
Performa:blm di coba
March 7, 2025
t**n d**y
Item: Default
Udah terimah dengan baik cepat dan puas
September 29, 2024
r**5
Item: Default
Barang sesuai deskripsi
August 16, 2024
@**k
Item: Default
Mantap juragan makasih banyak 🙏🙏
May 6, 2025
About this shop
Suhartono online
91%
Ships within 2 days
100%
Responds within 24 hours
About this product
Contains Dangerous Goods?Ya
Jenis GaransiGaransi Produsen
Brandhaidi
Product description
Modul Fast Charging IP2312 TYPE C 3A Polymer Ternary Lithium BatteryOutput yang tersedia : 4.2VFeatures:3A charging current,can change the current through adjusting resistance;2 types of cut-off voltage can be optional(4.2V/4.35V).3A polymer ternary lithium battery,quick charging board,provides efficient working effects.Note: this product does not have the power indicator function, does not have the battery protection function, the store also has the lithium battery protection board and the power indicator board to sell.Conversion efficiency: 3A 93%, 2A 94%, 1A 95% (data for reference only)IP2312 adopts the complete CC/CV charging mode:=> When the battery voltage is lower than 3V, it enters trickle charging mode and charges the battery with 100mA charging current.=> When the battery voltage is greater than 3V, it enters the constant current charging mode to charge the battery with the set constant current charging current.=> When the battery voltage is close to 4.2V and the charging current is less than 300mA, the battery enters the constant voltage charging mode. After entering the constant voltage mode, stop chargingevery 4 minutes and check whether the battery voltage is higher than 4.15V: if it is higher than 4.15V, stop charging; Otherwise, continue to charge, and then after another 4 minutes after detection.=> When the battery is fully charged, if it is detected that the battery voltage is lower than 4.1V, it will start to charge the battery.Specification:Main-control Chip: IP2312Type: Fast Charging BoardOutput: 4.2VInput: 4.5-5.5VCharging Current: 3ASize: One Size 1.5x3cm(0.59x1.18in)Current adjustment instructions:Default 3A,remove 2A resistance and convert to 135K resistance 1A.